Tri-Mark Rod Clip, RH
Tri-Mark Rod Clip, LH
Brass Rod Adapter, threaded 10-24. Used to connect a 10-24 threaded rod to the rotary latch.Overall measurements are 7/16" diameter x 5/8" length
Brass Rod Adapter, threaded 1/4"-20. Used to connect a 1/4"-20 threaded rod to the rotary latch.Overall measurements are 7/16" diameter x 15/16" length
Door rod adapter with set screw. Rod adaptor for 5/32in Rod. Allows user to create a connection point utilizing straight rod inserted into the .17" diameter hole and tightened with .09 HEX Set Screw.
Ball Catch latch, 2.375" overall width (also available in 2.75" wide, use part # UH-96170)
Heavy Duty Elbow Catch w/ catch plate
Ball Catch latch, 2.75" overall width (also available in 2.375" wide, use part # UH-96169)
Clevis yoke for door rod, end is threaded 1/4"-20. Overall length is 1.625"
Southco push-to-close black plastic latch typically used in Wheeled Coach and Taylor Made ambulances.
Gray plastic covers for McCoy-Miller squad bench latch, 2-piece set. (Latch mechanism sold separately, see part # AH-E2-50-101-10)
AH TM 11664 LH
AH TM 11665 RH
Latch kit for McCoy-Miller squad bench. Plastic covers are also available (see part # MM-107575)
Rotary latch, RH, Offset action lever, 1/4" thru-holes for mounting.
Wheeled Coach rotary latch w/ yellow release handle, LH*For REAR DOORS only*
Wheeled Coach rotary latch w/ yellow release handle, RH*For REAR DOORS only*
Trimark Rotary Latch with yellow release tab for Wheeled Coach, Left Hand.*For Curb Side Entry door only*
Trimark Rotary Latch with yellow release tab for Wheeled Coach, Right Hand.*For Curb Side Entry door only*
Rotary latch mechanism. Typically used on Wheeled Coach GSA style ambulances
Rotary Latch w/ quick release for AEV Entry doors
Trailing door latch used on Wheeled Coach entry doors, Yellow handle
Slam Latch, RH. Typically used on Excellance ambulances. Striker stud/plate included.